How to setup UPA-USB v1.3 clone to work

20. November 2017

I can not use 1.3 in my clone programmer UPA 1.3 from china, pcb red. The software that I go from the provider is the same file install.exe, lic and dll, also had uuprog.exe, that this thread is missing, but when I copy the 3 files and run the “cracked” uuprog.exe I received an instant fails, the Software does not load. If I keep the original uuprog.exe, then I am requested to activate the hardware device.

Has anybody overcome this problem yet?

Reply: Hi, I have a solution for those who want to run but can’t get it to work… I’ve only tested this on a 2014 Red UPA-USB device and it worked.

Note: bad UPA vs good UPA (i have the good one-left from obdexpress.co.uk)

You need to find and download a version of the crack folder which includes the uuprog.exe file AS WELL as the uuprog.dll file. I think most versions that you find will have a virus in the uuprog.exe file.. so you disable all other AV except for Windows Defender running on Win7. It will intercept the file and remove the virus leaving the rest of it in tact – you will see it is initially about 60k and reduces to about 28k once Defender has cleaned the file. Move this file along with the uprog.dll and uprog.lic file into the main program folder.

Disconnect usb device then launch uuprog.. it takes ages but eventually fires up. Then plug the usb device in and you will get the usual annoying activation screen. Type abc as user and abc as registration and click activate.

That’s it.. then it should activate and find your device.

I think the crack has moved the code of the original uuprog.exe into a uuprog.dll file as they are the same size.. then the tiny cracked 28k uuprog.exe just launches the original code from the dll file but tricks activation step. Most downloads of the crack are missing the amended uuprog.exe probably because it was stripped during upload because it contains a virus.


For people who having a problem with activation, copy and replaced the .exe file contained in the attachment in to the installation directory. Run the file and when ask for registration, use ABC as for name and password.


Good luck



Post to Twitter Tweet This Post

Kess V2 5.017 Clone Red PCB and Green PCB Comparison

17. November 2017
  1. The same

They are the same internally.

Kess v2 5.017 is the newest version and the sellers claim to support more 140 protocols including Line, KAN, EDC17 and MED17 and for Ford J1850

– Both version allows users to connect internet during operation and won’t be locked any more.

-Compatible with cars, trucks, tractors, bikes.

-Unlimited tokens (the former version is token limited)

– No reset button

– No USB dongle

  1. The different: PCB color

Kess V2 Master 5.017 china red pcb with best quality components, it follows:

Red board

  1. use of imported Japanese Murata NFE61PT472C1H9L filters.

2.8x WFs = Infineon, BCR112 NPN Digital Transistor

3.7x 27E = ON Semiconductor NUP2105LT1G

4.8x 6DW = NXP BC817215 NPN Bipolar Transistor

5.3x A6c = MMUN2113LT1G / MMUN2113LT3G check your ktag PCB may already have 3 x A6c

6.2x K5B = BC807-25-7-F PNP Bipolar Transistor


kess 5.017 red review kess v5.017 red review

src: http://www.obd2eshop.com/wholesale/kess-5017-red-pcb-firmware.html

  1. Kess V2 v5.017 eu version green pcb


SRC: http://www.obd2eshop.com/wholesale/kess-v2-green-pcb-firmware-5017.html

  1. Kesss V2 master 5.017 EU clone purple PCB






src: http://mhhauto.com/Thread-EU-KESS-KTAG-NEW-PCB-S-FOR-2016-SPECIAL-SALE-THIS-WEEK

Of course, neither China clone nor EU clone is original one, if you have big budget, buy original here http://www.alientech-tools.com/en/kessv2/.

Actually, china clone Kess V2 v5.017 in red pcb or green pcb works fine via plugging kess 5.017 into the OBD port of vehicle. Take some test reports for example:

edc15/16/17 basics work fine.. Kline an Can ok

lot of denso ok ,tested today on 2016 navarra 2.5L 144hp (7059) all fine..via OBD of course (check ktag for jtag,tricore and others… )

(The EDC17 made by OBD are Audi, bmw and renault without Tp)

Kess accept virtual read i test on AUDI A5 2.0 TDI 143hp 2013 EDC17CP46. it”s ok by obd

ksuite Sw reset token when open, same as all kess 5.017 or new ktag 7.020/26 Fw.

Berlingo 9HX: only readID from engineand works ok

PSA Bosch EDC 16: read ok

Skoda Octavia 1.9 AXR EDC15: read ok

BMW EDC17CP02: OBD write ok

BMW EDC15: OBD read/write ok

Ford Mondeo SID206: read/write ok

K-line and CAN both OK

VW EDC17CP14: read/write with tricore module

2008 Sprinters with Edc16:no issues

KESS V5.017 can support car/truck/tractor/Bike…support both 12V and 24V vehicle..and newer vehicles
KESS V5.017 has no token limited for all compatible vehicles
KESS V5.017 has no grey protocols ..full protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10….
KESS V5.017 read and write ECUs via OBD easily, Do not need to disassemble ECU…more user-friendly than KTAG V7.020
KESS V5.017 do connect internet…Online operation..no need disable the network connection on purpose before use

To be continued…

Claimed KESS V5.017 car list

KESS V5.017 installation video:



Post to Twitter Tweet This Post

Ktag firmware 7.026 Reviews

17. November 2017

Ktag 7.026 discussion at http://mhhauto.com/,See how do people think of this?

ktag 7.026 pcb


This 7.026 update is all ready available from EU. “Problem ” is resetting. NXP need replace when time to reset tokens, after 30 writing. That can do few times if have good skills and good tools for this.


when you turn 1 job down you will think l should off upgraded , alot more gpt connections on newer ecu,s


7.026 is the one with 3 NXP mcu’s . everyone with 30 writings. i use it allow. all working ok and i think by the time i will use all 90 writings a new tool will come.


if you need Denso Nec NBD family the only tool doing this 100% is my 7.026. 7.020 will NOT MAKE DENSO NEC NBD even 15%. there may be 1 or 2 of the ecus it can do but that’s it. and no one aside from us can offer you 7.026 as its socketed solution. anyone who tells you 7.020 can make denso nec nbd 100% is just gonna take your money


I have ktag 7.026. Tool is OK.

Although it requires a good coffee machine… my reworked ktag 6.070 is MUCH faster


Ktag firmware 7.026 have MCU for change

Ktag firmware 7.020 not reset CFG


Ktag 7.026 TOKENS 30 in 1 MCU

Ktag 7.020 UNLIMITED


This ktag has some nice features like toyota denso or VAG GPT edc17c74


some EU seller claims that he has version without tokens limit.


Ktag 7.026 Russian clone has fixed firmware with token count stopped.

I use kess and ktag. No any headache. No heating to unlock, no nxp changing.


For kess v2, As i know, for 5+ firmware, protocol files crypted individually for each original.

You can’t update different devices with same files.

Since Kess V2 4.036 a lot of protection added.

For ktag, i think, the same.

Take care before spend 2000+

In summary, there are good and bad reviews of ktag 7.026. Hint for you, do not rush into new versions. Time will tell you good or not. Before this, go for Ktag firmware 7.020.

See this

Ktag 7.020 test report:


Ktag 7.020 review:



Post to Twitter Tweet This Post

SKP1000 Key Programmer Good and Bad Reports

14. November 2017

SKP1000 key programmer good results:

-I have passed SKP1000 key programmer because I always morn when most tools don’t work.

I bought this tool skp1000 is awesome, one of the best tools I have ever bought for my hard earn money, tried first time last week to program Citroen C8 remote car starts and remote works, the best you would really like to know is when you change to English language you can copy all VW ID48 chips and more, this tool will read pin code on most cars and you can change mileage on most cars, maybe one day they will update Audi key programming, the best thing about this Chinese tool is that it does what it says on the tin.

– Nissan xtrail add remote key success

Transit 2007 all key lost – add key OK

Toyota Auris 2011 – connect, see key info

– SKP1000 can virgin 2017 toyota corolla immo and programme keys.

to be continued…

http://www.skp1000.org/ search all possible testable car models

SKP1000 key programmer bad results:

BMW e90 320d 2005 – connect failed

Fiat Grande Punto 2009 – connect failed on standard OBD2 plug, don’t try use Fiat cable adapter

Soft – 8.19

Advice: Choose in the menu of the Fiat 500 with the prepared key by the dealer, or by a good locksmith

Claimed SKP1000 key programmer coverage:

All here for reference:

SKP1000 key programmer coverage

Note: SKP1000 is frequently updatable, this car list is only for reference.

Where is good place to have SKP1000 key programmer?

Personally, Ebay and Aliexpress are shops, where all the sellers sell their product, so more seller, more different price, more choice, and so more difficulties to choose which one…..

My main supplier is www.obd2eshop.com (not a new shop, but the old careucar.com change new name), personally speaking they are worth to believe.

SKP1000 usually ship out within 24 hours with tracking number.


Post to Twitter Tweet This Post

Nissan Altima 2006 program key with Consult III

14. November 2017

This tutorial of how to use Nissan Altima 2006 program key with Consult III special diagnostic tool and NSPC001 pin code reader.

Tools to use:

Nissan Consult 3 diagnostic scan tool + Security Card immobilizer for Consult iii

NSPC001 Nissan Automatic Pin Code Reader

Nissan PIN CODE is needed when programming keys. So first of all connect the NSPC001 Nissan pin code reader into the OBD diagnostic socket. Read the 5-digit BCM code and transfer it to 4-digit pin code (NSPC001 has the function). Write down the pin code. Disconnect the pin code reader.


Plug Nissan Consult 3 scanner to the computer and vehicle with USB or Bluetooth connection

Insert key into the key hole, turn ignition ON with engine OFF

Start Consult-III software on the desktop

Click on “Connect” button on VIMI selection screen to connect with VI

When the computer and vehicle establish good communication, the Consult3 software will display VIN info.

Choose Nissan model and year, confirm vehicle information.

Wait until the Nissan Consult module to access all control modules, Engine, BCM, Transmission, Airbag etc. The car dashboard will illuminate and the indicator lights on Consult 3 will flash.

Click Diagnostic icon to welcome to Direct Diagnostic Mode program

Tick Key programming icon (NATS SELECT DIAG MODE) on the left menu, plug the Security card and press START

(There are two options under NATS SELECT DIAG MODE, Select C/U INITIALIZATION.

Push START BUTTON after enter password

Manually enter the pin code

Initialization completed

Follow system prompts until key programming procedure is done completely.



Post to Twitter Tweet This Post

Toyota G chip add key, which key programmer?

10. November 2017
There are 6 Toyota G chip add key programmers advice.
Top 1: Toyota G and Toyota H Chip Key Programmer
Top 2: Smart Key Maker for Toyota G Chip and Lexus
Top 3: Toyota Lexus Smart Key Programmer
Top 4: TJECU CN900mini + YS31 CN5 chip
Top 5: JMD Handy Baby clone machine
Top 6: OBDSTAR X100 Pro or OBDSTAR X300 PRO3
Option 1: Toyota G and Toyota H chip key programmer
It works perfectly fine. I remote programming works as advertised. Very simple. Tested on Toyota Highlander and Toyota Rav4 until now.Separate key and remote on these cars that I tested.
Remote section works perfect no problem tested on a 2009, 11, 15 Camry , RAV4 , Prius C
What the description claims:
Apply to 4D67,68,72(G), support both G and H chip, test on 2015 Camry
Toyota Add Remote Control
Get in the car and close the door, insert the key and turn the key on, insert the device into OBD. After the sound(Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘ lock & unlock’ key at the same time. And press the’ lock’ key. If the blaring end, It’s OK.
Note: Switch is on the right (add remote control).
Toyota Add Transponder:
Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD. If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,
anti-theft light will be off later.
Note: switch is on the left.( add transponder)
Price: $15.99
Source: http://www.obd2eshop.com/wholesale/toyota-g-h-chip-programmer.html
Option 2: smart key maker for Toyota G chip and Lexus
There is no need to install the driver and software for the key programmer, it is Secure, stable, fast, if you lost all the Toyota key with G chip, Lexus Smart Key Programmer, can add 1-3 keys.
Please use the normal key programmer read the data of 93C66/93C46/93C86, save the data and do the process next.
Take of the ECU Anti-theft module, and install the 93C66 eeprom IC to the Toyota right size adapter, then connect the USB with the computer, turn the function switch to Toyota G chip, then you can note the Indicator start shinny, then the process is success. Put the 93C66 back to ECU Anti-theft module, and after installed the Anti-theft module on the car, put in the first key, then take out the key once the Indicator off, and then out in the second key, do as the last process, after the Indicator off,, you can power on your car. You don’t need Synchronous operation.
Tip: One time just can match one IC, not depend on the turn, key don’t far away from the Sensing area.
Price: $129.99
Source: http://www.obd2eshop.com/wholesale/g-chip-and-smart-key-maker-for-toyota-and-lexus.html
Option 3: Toyota Lexus Smart Key Programmer
Take off the ECU IMMO model,. Then install the 93C46 eeprom IC on the Toyota key programmer right related adapter, then connect the USB with the computer, turn the function switch to Lexus Key, then you can note the Indicator start shinny, Induction into the circle of the key, touch the switch now by clicking under the relative position of the moment began to flash lights, light goes out after a few seconds, initialization is successful. Replace the eeprom IC EUC security module, replace the vehicle anti-theft module.
The ECU BOX module removed, the 93C86 eeprom IC programmer installed on Toyota models corresponding to transposons, connect the USB cable to the computer, and then switch to Lexus Key features bit, you can see the relative position of the 93C86 LEDs flash slowly into the state, put the key into the induction circle, now click touch switch relative position under the lights began to flash at the moment, a few seconds after the light is off, the initialization is successful.
Replace the eeprom IC EUC security module, replace the vehicle anti-theft module.
Indicate: Z type machine simply clean with alcohol IC pin into the transposon after, H-type
machine choose the corresponding IC solder pads.
Price: $139 in total
Source: http://www.obd2eshop.com/wholesale/smart-key-programmer-for-2009-2012-smart-key-for-toyota-lexus.html
Option 4: TJECU CN900mini plus YS31 CN5chip
TJECU CN900 mini plus one YS31 CN5 chip can copy Toyota G Chip, CN900mini can identify Toyota “G” chip key (year: 2010) (Chip: 4D-72).  Besides, TJECU CN900mini covers 4C 46 4D 48, etc.
FYI:  To copy one Toyota G chip TJECU CN900 mini will deduct one token. There are 12 tokens as default, After use up, please send obd2eshop.com customer service with the serial number and the machine prompt code, then you will gain 12 tokens for free, for the second time, the tokens will be charged.
This is YS31 CN5 chip.
Price: $189 CN900mini + $30YS31 CN5 chip (5pcs)= $211
Source: http://www.obd2eshop.com/wholesale/cn5-toyota-g-chip-5-pcs-lot.html
Option 5: JMD Handy Baby clone machine adds key on Toyota G chip
JMD Handy Baby G chip function is optional to authorize by extra money, as I known cost about $80, after payment succeed, mail the machine serial number for authorization file, then get the file to update.
Price: $499 (JMD Handy Baby clone machine + G chip authorization)
Source: http://www.obd2eshop.com/wholesale/cbay-key-copy-key-programmer.html
Option 6:  OBDSTAR X100 pro adds key on Toyota G chip
OBDSTAR X100pro and X300 pro3 is tested to add key on Toyota G chip.
Firstly connect it to the EEPROM PIC 2-in-1 adapter, then take apart the immobilizer box and initialize data to add key. Take 93C66 for example, find out the exact chip e.g 93C66 to connect with X100 pro, click option 93C66then put back the chip and go on add key.
Data initialization
Immobilizer initialization
VIOS immobilizer(with G)
Key chip 4D60(93C66)
Camry immobilizer
With G
Without G
Corolla immobilizer
89780-02070(93C66)(Without G)
RAV4 immobilizer (with G)
Tundra immobilizer (with G)
Other immobilizer (with G)
Data initialization(93C66)
Price: $299
source: http://www.obd2eshop.com/wholesale/obdstar-x-100pro-c-type.html
That’s all
To sum up, which one to have, it depends on how deep you want them to go, and how much budget to invest.

Post to Twitter Tweet This Post

GM TECH2 is more than one simple diagnostic tool, but…

9. November 2017

Is GM TECH2 a full function device that will allow BCM access to reprogram for Remote Key fobs and steering control modules, etc. or is it simply a diagnostic tool?

Professional answer:

Full blown and updated to current software, and you will get a cracked copy of TIS2000. The glitch, is that the TIS2000 has been cracked so it does not connect to the GM site to authorize the software, so if you need to download a updated flash file from GM, your not going to be using the cracked version of TIS2000 to do so.


picture source:


So, the tool itself will allow code programming and testing just like a real GM Tech II, and you don’t need to use Tis2000 at all to do this with the tool.

Its when you are trying to reflash a module with upgraded software instead, and where you need to have access to the needed update file that things get a little more difficult instead. With TIS2000 (used mostly for updating software in the module), the TechII becomes a pass-through module so you can connect the car to a laptop and upgrade the software.

Since the cracked version of Tis2000 is not connecting to GM, it can’t be used to try to download the needed file from GM directly instead.

Here is you can’t find a source for the needed file other than GM direct, then GM does sell a one day subscription for $55 that you use instead. Hence you will uninstall the cracked Tis2000 version, install a normal Tis2000 version and use your one day key to activate it, down load the needed file for GM, and use it with the clone as pass-thou to reflash a module instead.

Note, if you do this, download all the files you can get your hands on during that one day for your car, and store them so you have them for a laster date if you need to change a module down the road and need to flash it at a later date.

As for the cracked version of Tis2000, it does make life a little simpler with the tool, since it saves a lot of Tech II button clicking instead. hence instead of using the tool as stand alone, your using your laptop to drive the tools normal functions instead.

Note, the tech II comes with a rs-232 cable to connect to your laptop. Since most new laptops do not have a RS-232 data port, then you will need not only a USB cable instead, but the needed driver for the USB cable as well.

Credits to @Dano523 CF Senior Member.

Hottest topic:

GM Tech2 scanner SP23-B3, SP23-1, SP23-B, SP23-C, what are the differences

You have to look carefully at what is included. For example the -B comes with the case but the memory card is not listed or shown. The -B3 came with all the accessories but no case which reduced shipping cost by quite a bit. You can’t go wrong with the -B3. It has everything but the case.

Tips Help you choose suitable Tech II:

All Tech2 have the same function, their differences are :

SP23-B is the best Tech2 with Black Carry box, more stable

SP23-B3 is the SP23-B with carton box and best quality

SP23,SP23-C is the same as SP23-B, it also includes the Black carry box, but comes from another manufacture.

SP23-1 is the most cost effective one, it is with carton box, will help you save much more money.



Post to Twitter Tweet This Post

GM Tech2 SP23-B SP23-B3 SP23-1 Which is better?

8. November 2017

There are GM Tech2 scanner (Item No. SP23-B3, SP23-1, SP23-B, SP23-C on www.obd2eshop.com), some new users may be confused, what are the differences?

You have to look carefully at what is included. For example the -B comes with the case but the memory card is not listed or shown. The -B3 came with all the accessories but no case which reduced shipping cost by quite a bit. You can’t go wrong with the -B3. It has everything but the case.

Tips Help you choose suitable Tech II:
There are 5 configurations of Tech2 on our website. All of them have the same function, their differences are :

SP23-B is the best Tech2 with Black Carry box, more stable

SP23-B3 is the SP23-B with carton box and best quality

SP23,SP23-C is the same as SP23-B, it also includes the Black carry box, but comes from another manufacture.

SP23-1 is the most cost effective one, it is with carton box, will help you save much more money.

Also if you read through the info they are offering a 6% discount now, if you enter the discount code.
“Good news!!! Add to cart first, input coupon code “Erin” to get 6% discount”.

Post to Twitter Tweet This Post

GM TECH2 works great on GM Corvettes

6. November 2017
I took some pictures of myself, the quality of the cables and connectors and even the discs with which it comes. you do not need to download the manual, it’s on the data disc
The unit itself … and the software CD … pretty good imitations, I think that’s what the others say, it’s a TECH II

I took some pictures of myself, the quality of the cables and connectors and even the discs with which it comes. you do not need to download the manual, it’s on the data disc

The unit itself … and the software CD … pretty good imitations, I think that’s what the others say, it’s a TECH II

gm tech unit-01

and here is the CANDI unit and cables ….. pretty high quality stuff along with one of the 12 volt adapters

gm tech candi interface-02

And another shot of the data disks .. as you can see the labels were not made with an INK JET printer … and the a second cigarette lighter 12 volt power cable

gm tech unit-03

and ….every cable and cable end you would need to connect to any GM car.

gm tech cable-04

but wait, if you act today there is more …..

gm tech full package-05

Personally, I can verify that they look to be the real CDs that come with the GM Tech 2 units.

GM Tech2 feedback on Corvettes C5:

-> Take 2011 Corvette LS3 for example, use it as a diagnostic tool /TCM reset tool , accessed the ABS and BCM modules and to turn on and off certain toggles etc.

-> Mine software is out of date, but I can get into most everything that I have tried to so far on newer cars. I used the “Global OBD II” under the VIN info page. I have not tried to program anything this way, but I have been able to access all the different modules on the CAN buss.

But I was suggested to update by getting the newest PC card from one of the online sellers, 2011 is the last update that GM did on the Tech 2 for Corvettes, so the newer units being sold all have the latest software already loaded on the GM card. Below is the latest card for GM for the Tech 2..From their site…

32MB Card for GM TECH2 (GM OPEL SAAB ISUZU SUZUKI & Holden)(Item No. SO22-C) $21.99

Their description: Works with GM TECH2, contain the latest software for GM TECH2. It has six kinds of software, SAAB, OPEL, GM, ISUZU, Suzuki and Holden. Customers can choose one type of software to be loaded to this 32MB Card.



Didn’t work on certain GM trucks

Overall, GM tech2 clone is a priceless tool, a $250.00 device does everything that the $5,000 device does …things that make you go ” Hmmmmm”. Besides, it works for more than Corvettes… there are a lot of repair shops that are using a knock off. Several users over on C5 have bought them and reports are positive from what I saw…

Where is the good place to have Tech 2 unit clone?

I bought mine from

http://www.obd2eshop.com/wholesale/gm-tech2-gm-diagnostic-scanner.html, because it’s working and sales at cheaper price after I learnt from this forum www.corvetteforum.com/forums.



Post to Twitter Tweet This Post

Handy Baby and CN900 Mini Which is better for ID48 Cloning

3. November 2017

Actually, to copy ID 46 both handy baby and cn900 mini work ok.

I have done a few copies with mini cn900 for Nissan and made a straight copy, cut the key and copy in the office, went to vehicle and work. It does ask for some other vehicles to do the sniff.

If you want to also copy ID48, I suggest to you friends handy baby is the better one which can copy some of 48 chips.

Hot topic:

1) nd900 vs cn900 vs handy baby, which is better or its same?

Nd900 and cn900 are the same, with different color. All these devices update online.
handy baby is better and price 2 times higher.

2) cn900mini feedback on what can work:


-> So decoders are built definitely worth the money and good as a backup machine.

-> clone a Ford 4D63 into a cn2 chip with minicn900

-> clone a Toyota G chip into a cn5, no internet or decoder box

-> Can make ID48 80 bit into useable 40bit chip. Really powerfully machine if you know how to use it.

3) Handy baby Feedback

-> Handy baby works fine for fiat, but some take well over 30 mins to decode. Have done one Volvo, no problem.

-> The handy baby works very well. It is not a straight copy, you must still do sniff, but you do it using the built in antenna.

-> Handy baby needs to be connected to pc to clone g chips, works well. Although I did a chip on an Australian commodore & the range wasn good enough to reach their reader so wouldn’t work in the key.

-> Handy Baby programmer works fine on most of the functions it says it does. It’s a great tool

4) Claimed cloning coverage:

Both JMD Handy baby and TJECU CN900 mini can work on:

Copy 4D / 4C

Copy ID46

Copy 72G

Copy ID42

Copy ID11

Copy ID12

Copy ID13

Copy ID33

JMD Handy baby can work but TJECU CN900 mini can’t work:

4D86 DST80 (Ford) 4D70 DST80 (Hyundai/ KIA)

Copy ID48

Their features:

-> Mini CN900 Transponder Plus TOYO Key OBD II Key Pro work on Toyota ID72 (G) all key lost

Question: Mini Cn900 Plus Toyokey Does it really works???

Answer: toyota H chips not yet but G chips yes MINI 900 and handy baby can do it. toyo-key-obd-ii-key-pro-new-6


Handy Baby Plus JMD Assistant OBD Adapter works on Read ID48 Data from VW Cars


Source: http://www.obd2eshop.com/wholesale/jmd-assistant-handy-baby-obd-adapter.html

Handy Baby G Chip is paid option


Source: http://www.obd2eshop.com/wholesale/handy-babyg-function-authorization.html

That’s all.



Post to Twitter Tweet This Post